PPS needle punched anti-static 550g/m2 filter bag

Pungă filtrantă cu colector de praf din poliester cu strat ptfe
Chemical industry acid resistance p84 bag filter with membrane
sac de filtrare (1)
1299131776_yngs_副本
sac de filtrare (1)
1299131776_yngs_副本

PPS needle punched anti-static 550g/m2 filter bag

Categorii: , ,

  • Descriere
  • Anchetă

PPS filter bag

PPS is one of the most important high temperature thermoplastic polymers because it exhibits a number of desirable properties. These properties include resistance to heat, acids and alkalies, and to mildew, to bleaches, aging, and abrasion.

The acid and alkali resistance is Excellent. Meanwhile, PPS fiber does not burn, neither does it support burning. The temperature resistance is up to 200ºC (392ºF). The resistance to oxidation is poor. So the working environment requires the oxygen content less than 14%(Vol.), and the oxynitride content is less than 600mg/Nm3. The higher oxygen contents the lower working temperature.

 

Surface Treatment:

 

1. Water and oil repellent treatment: A substantial increase in performance of water and oil repellent 2. Acrylic coating: A substantial increase in Abrasion resistance property 3. Carbon coating: Anti-spark 4. PTFE film: Improve filtration precision: ≤5gsm/Nm3, but lower the filtration efficiency; and a substantial increase in acid-base resistance property 5. PTFE paint-coating: Improve filtration precision: ≤10gsm/Nm3, does not lower the filtration efficiency; and a substantial increase in acid-base resistance property 6. PTFE dipping: Improve filtration precision: ≤25gsm/Nm3, does not lower the filtration efficiency; and a small increase in acid-base resistance property
Aplicație:

electric station boiler, coal-fired boiler, incinerarea deşeurilor, metal smelting, chemical industry and low oxidation gas smoke.

 

 

Filtrul cu sac de tip CNMC are o structură mult mai simplă și o amprentă mult mai mică în comparație cu alte sisteme de filtrare cu curățare prin impulsuri&cerințe în toate aspectele.În procesul de producție

 

 

550g / m2 cu membrana ptfe,dimensiune 150mmx7050mm pungă filtru pps550g / m2 cu membrana ptfe,dimensiune 150mmx7050mm pungă filtru pps

 

 

Specificație

 

 

Name
PPS/polyphenylene sulfite fibre
Componet
Shell Fiber
PPS+PTFE
Scrim
PTFE
Greutate
400-650g/m2(Customized)
Air Permeability
120
Tensile Strength
Length
≥850
Cross
≥1200
Elongation at break
Length
≤10
Cross
≤40
Temperature
Continua
170℃
Peaks
200℃
Characteristics
Good at corrosion resistance and slow decay,longivity in use
finalizarea
Heat Stabilization,Glaze,Singe,PTFE Impregnate
Use Scope
Unit with ESP and bags or old unit retrofits,or unit requires long longivity and lower oxygen.ESP for the dust contents with high SO2 and NOX.

 

 

 

550g / m2 cu membrana ptfe,dimensiune 150mmx7050mm pungă filtru pps

 

550g / m2 cu membrana ptfe,dimensiune 150mmx7050mm pungă filtru pps550g / m2 cu membrana ptfe,dimensiune 150mmx7050mm pungă filtru pps

 

Aplicații
550g / m2 cu membrana ptfe,dimensiune 150mmx7050mm pungă filtru pps
Filtrul cu sac de tip CNMC are o structură mult mai simplă și o amprentă mult mai mică în comparație cu alte sisteme de filtrare cu curățare prin impulsuri
550g / m2 cu membrana ptfe,dimensiune 150mmx7050mm pungă filtru pps
Ambalare & Livrare

Contactaţi-ne






produse asemanatoare