Pungă de filtrare a centralei electrice cu praf de temperatură ridicată

Waste incineration refuse burning polyamide p84 dust filter bag
550g/m2 Acrylic filter bag with ptfe coating
Sac filtrant (2)
1299131776_yngs_副本
Sac filtrant (2)
1299131776_yngs_副本

Pungă de filtrare a centralei electrice cu praf de temperatură ridicată

Categorii: ,

  • Descriere
  • Anchetă
Pungă de filtrare a centralei electrice cu praf de temperatură ridicată

PPS is one of the most important high temperature thermoplastic polymers because it exhibits a number of desirable properties. These properties include resistance to heat, acids and alkalies, and to mildew, to bleaches, aging, and abrasion.

The acid and alkali resistance is Excellent. Meanwhile, PPS fiber does not burn, neither does it support burning. The temperature resistance is up to 200ºC (392ºF). The resistance to oxidation is poor. So the working environment requires the oxygen content less than 14%(Vol.), and the oxynitride content is less than 600mg/Nm3. The higher oxygen contents the lower working temperature.

Aplicație:

electric station boiler, coal-fired boiler, incinerarea deşeurilor, metal smelting, chemical industry and low oxidation gas smoke. wood dust collector、woodworking dust collection、dust collector design、dust control systems、dust collector system、colector de polvo、dust extraction equipment、dust removal system

Surface Treatment:

1. Water and oil repellent treatment: A substantial increase in performance of water and oil repellent 2. Acrylic coating: A substantial increase in Abrasion resistance property 3. Carbon coating: Anti-spark 4. PTFE film: Improve filtration precision: ≤5gsm/Nm3, but lower the filtration efficiency; and a substantial increase in acid-base resistance property 5. PTFE paint-coating: Improve filtration precision: ≤10gsm/Nm3, does not lower the filtration efficiency; and a substantial increase in acid-base resistance property 6. PTFE dipping: Improve filtration precision: ≤25gsm/Nm3, does not lower the filtration efficiency; and a small increase in acid-base resistance property
Specificații
Name
PPS/polyphenylene sulfite fibre
Componet
Shell Fiber
PPS+PTFE
Scrim
PTFE
Greutate
400-650g/m2(Customized)
Air Permeability
120
Tensile Strength
Length
≥850
Cross
≥1200
Elongation at break
Length
≤10
Cross
≤40
Temperature
Continua
170℃
Peaks
200℃
Characteristics
Good at corrosion resistance and slow decay,longivity in use
finalizarea
Heat Stabilization,Glaze,Singe,PTFE Impregnate
Use Scope
Unit with ESP and bags or old unit retrofits,or unit requires long longivity and lower oxygen.ESP for the dust contents with high SO2 and NOX.
Aplicații
Filtrul cu sac de tip CNMC are o structură mult mai simplă și o amprentă mult mai mică în comparație cu alte sisteme de filtrare cu curățare prin impulsuri&cerințe în toate aspectele.În procesul de producție
Filtrul cu sac de tip CNMC are o structură mult mai simplă și o amprentă mult mai mică în comparație cu alte sisteme de filtrare cu curățare prin impulsuri
Ambalare & Livrare
Recommend Products

Contactaţi-ne






produse asemanatoare