PPS kim đột lỗ túi lọc 550g / m2 chống tĩnh điện

Túi lọc bụi Polyester với lớp phủ ptfe
Chemical industry acid resistance p84 bag filter with membrane
túi lọc (1)
1299131776_yngs_副本
túi lọc (1)
1299131776_yngs_副本

PPS kim đột lỗ túi lọc 550g / m2 chống tĩnh điện

Thể loại: , ,

  • Sự miêu tả
  • Cuộc điều tra

PPS filter bag

PPS is one of the most important high temperature thermoplastic polymers because it exhibits a number of desirable properties. These properties include resistance to heat, acids and alkalies, and to mildew, to bleaches, aging, and abrasion.

The acid and alkali resistance is Excellent. Meanwhile, PPS fiber does not burn, neither does it support burning. The temperature resistance is up to 200ºC (392ºF). The resistance to oxidation is poor. So the working environment requires the oxygen content less than 14%(Vol.), and the oxynitride content is less than 600mg/Nm3. The higher oxygen contents the lower working temperature.

 

Surface Treatment:

 

1. Water and oil repellent treatment: A substantial increase in performance of water and oil repellent 2. Acrylic coating: A substantial increase in Abrasion resistance property 3. Carbon coating: Anti-spark 4. PTFE film: Improve filtration precision: ≤5gsm/Nm3, but lower the filtration efficiency; and a substantial increase in acid-base resistance property 5. PTFE paint-coating: Improve filtration precision: ≤10gsm/Nm3, does not lower the filtration efficiency; and a substantial increase in acid-base resistance property 6. PTFE dipping: Improve filtration precision: ≤25gsm/Nm3, does not lower the filtration efficiency; and a small increase in acid-base resistance property
Ứng dụng:

electric station boiler, coal-fired boiler, đốt chất thải, metal smelting, chemical industry and low oxidation gas smoke.

 

 

Factory&Xưởng

 

 

550g / m2 với màng ptfe,kích thước 150mmx7050mm túi lọc pps trạm điện550g / m2 với màng ptfe,kích thước 150mmx7050mm túi lọc pps trạm điện

 

 

Specification

 

 

Name
PPS/polyphenylene sulfite fibre
Componet
Shell Fiber
PPS+PTFE
Scrim
PTFE
Weight
400-650g / m2(Customized)
Air Permeability
120
Tensile Strength
Length
≥850
Cross
≥1200
Elongation at break
Length
≤10
Cross
≤40
Temperature
Continue
170℃
Peaks
200℃
Characteristics
Good at corrosion resistance and slow decay,longivity in use
Finish
Heat Stabilization,Glaze,Singe,PTFE Impregnate
Use Scope
Unit with ESP and bags or old unit retrofits,or unit requires long longivity and lower oxygen.ESP for the dust contents with high SO2 and NOX.

 

 

 

550g / m2 với màng ptfe,kích thước 150mmx7050mm túi lọc pps trạm điện

 

550g / m2 với màng ptfe,kích thước 150mmx7050mm túi lọc pps trạm điện550g / m2 với màng ptfe,kích thước 150mmx7050mm túi lọc pps trạm điện

 

Các ứng dụng
550g / m2 với màng ptfe,kích thước 150mmx7050mm túi lọc pps trạm điện
Detailed Images
550g / m2 với màng ptfe,kích thước 150mmx7050mm túi lọc pps trạm điện
đóng gói & Được lắp đặt với một bánh xe đa năng

Liên hệ chúng tôi






Những sảm phẩm tương tự