ผ้าใบกันลม / ผ้าสำหรับแป้ง แอร์สไลด์ แคนวาส

White Textile Conveyor Belt Cement Airslide fabric

Air slide fabric for 100% filament polyester

INTRODUCTION

We provide Airslide belt for conveying bulk material by air gravity. The main use of Airslide belt is discharging, declining transportation or homogenizing the powder or small granular material in quiescent condition. Our airslide belt is named as Airslide fabric, Airslide membrane, Air slide cloth, Air slide canvas, Air permeable fabric, and Fluidization cloth, fluidising fabric, etc by our customer. We adopt 100% polyester for airslide fabric material.

Our fabrics can be used at temperatures between -60°C and +150°C. The airslide fabrics are made from polyester yarns.
We are also, however, able to weave fabrics to our customers’ specific demands for air permeability and mechanical strength.

Advantages

• No moisture absorption
• No caking
• Resistant to rotting and decomposition
• Complete unloading without residues
• Consistent fluidization over the complete surface
• Good resistance to abrasion
• Low wear and therefore longer life
• Low shrinkage even when used under hot and humid conditions

หลักการทำงาน

In cement plant:
An Airslide belt is in the middle of a chute. Powder material will come into the chute above Airslide belt. Material will flow to the chute lower side as pneumatic blower down Airslide belt. That’s why we say Airslide belt can move powder material because of the wind power. แล้วก็, the rest wind will go out from the top of the chute. Through the moving, no parts moved except powder material. So that it can spare more energy and maintain cost, ฯลฯ.

In fluidization silo:
Our Airslide canvas is installed on the surface of the silo bottom. It is supplied for installation as aeration units on the sloped conical bottoms of bins and silos to aid in the withdrawal of dry relatively free-flowing material.

Each Airslide aeration unit package consists of 200mm open-type. Airslide conveyor units in lengths of 1.5 or 3m depend on the slope length of the conical storage area. Some spoke patterns are normally used with materials which have good fluidization characteristics. Others spoke patterns provide maximum aeration for difficult materials which can be fluidized.

In cement vessel’s hold:
The sloped bottom of the cargo hold is covered with fluidizing panels. Our airslide fabric is on the surface of fluidizing panels. Rotary piston blowers supply the panels with oil-free compressed air and make the cement flow to the lowest point, where the discharge gate is installed.

Air slide fabric for particulate material transportation. Another name: Air slide cloth, pneumatic fluidizing canvas

โอกาสทำงาน

In industry

สถานีไฟฟ้า
กรองฝุ่น
เถ้าถ่าน, ปล่อยเถ้าถ่าน
ฝุ่นถ่านหิน
อาคารและการก่อสร้าง
ปูนซีเมนต์, ฝุ่นเตา, ยิปซั่ม, หินปูน, finely ground quartz,
Calcium hydroxide, lead monoxide, quicklime, acid crystals,
Pure clay, phosphates, magnesite concentrate, finely ground
fluorid, production of aluminum
Chemical Industry
Thomas meal (Fertilizer)
Rubber compounds, sinter dust, catalysts
Sodium sulfate
Soap powder

In machinery:

Silos / Tanks
Discharging systems
Warehouse units
Mixing equipment
Homogenizing systems
Chute Bottoms
Conveyor systems
Ventilator systems
Aeration systems
Vehicles
Silo truck discharging cones
Railway wagon discharging cones
Vessel aeration & discharging bottoms
Container aeration & discharging bottoms
Powder Coating Machinery
Bottoms for sinter basin

ข้อมูลข้อมูลจำเพาะ:

Raw Material =100% spun fiber polyester

Weight in average = 4000 กรัม/m²
Thickness = 5mm
Mean Air Permeability = 400 ม³/ม²h @350H₂โอ

Pressure: 2000pa for middle air resistance

4000pa for high air resistance

ทำลายความแข็งแกร่ง- วาร์ป=>6000 N/5cm X 20cm
ทำลายความแข็งแกร่ง- ผ้า = >3000 N/ 5 ซม. X 20 ซม.
ทำลายการยืดตัว – วิปริต=<5%
การยืดตัวขาด -weft=<5%

Max Width: 2800มม

Operating Temperature < 150 องศา C
Recommended Maximum Continues <180 องศา C
ไฟกระชากสูงสุดที่แนะนำ = 180 องศา C