Luchtglijstof voor cement

INVOERING

We provide Airslide belt for conveying bulk material by air gravity. The main use of Airslide belt is discharging, declining transportation or homogenizing the powder or small granular material in quiescent condition. Our airslide belt is named as Airslide fabric, Airslide membrane, Air slide cloth, Air slide canvas, Air permeable fabric, and Fluidization cloth, fluidising fabric, etc by our customer. We adopt 100% polyester for airslide fabric material.

Our fabrics can be used at temperatures between -60°C and +150°C. The airslide fabrics are made from polyester yarns.
We are also, however, able to weave fabrics to our customers’ specific demands for air permeability and mechanical strength.

Advantages

No moisture absorptionNo cakingResistant to rotting and decompositionComplete unloading without residuesConsistent fluidization over the complete surfaceGood resistance to abrasionLow wear and therefore longer lifeLow shrinkage even when used under hot and humid conditions

Werkend principe

In cement plant:
An Airslide belt is in the middle of a chute. Powder material will come into the chute above Airslide belt. Material will flow to the chute lower side as pneumatic blower down Airslide belt. That’s why we say Airslide belt can move powder material because of the wind power. And then, the rest wind will go out from the top of the chute. Through the moving, no parts moved except powder material. So that it can spare more energy and maintain cost, enz.

In fluidization silo:
Our Airslide canvas is installed on the surface of the silo bottom. It is supplied for installation as aeration units on the sloped conical bottoms of bins and silos to aid in the withdrawal of dry relatively free-flowing material.

Each Airslide aeration unit package consists of 200mm open-type. Airslide conveyor units in lengths of 1.5 or 3m depend on the slope length of the conical storage area. Some spoke patterns are normally used with materials which have good fluidization characteristics. Others spoke patterns provide maximum aeration for difficult materials which can be fluidized.

In cement vessel’s hold:
The sloped bottom of the cargo hold is covered with fluidizing panels. Our airslide fabric is on the surface of fluidizing panels. Rotary piston blowers supply the panels with oil-free compressed air and make the cement flow to the lowest point, where the discharge gate is installed.

Werkgelegenheden

In industry

Power Stations Filtered dust Flue ash, discharging flue ash Coal dust

Bouw en constructie
Cement, ovenstof, gips, kalksteen, fijngemalen kwarts, Calcium hydroxide, loodmonoxide, ongebluste kalk, zure kristallen, Pure klei, fosfaten, magnesietconcentraat, finely ground fluorid, productie van aluminium

Chemische industrie
Thomas maaltijd (Kunstmest) Rubberverbindingen, sinterstof, catalysts Sodium sulfate Soap powder

In machinery:

Silo's / Tanks Discharging systems Warehouse units Mixing equipment Homogenizing systems

Chute Bottoms Conveyor systems Ventilator systems Aeration systems

Vehicles
Silo truck discharging cones Railway wagon discharging cones Vessel aeration & discharging bottoms Container aeration & discharging bottoms

Powder Coating Machinery Bottoms for sinter basin

Specification data:

Raw Material =100% spun fiber polyester

Weight in average = 4000 g/m2 Thickness = 5mm
Mean Air Permeability = 400 m3/m2h @350H2O

Druk: 2000pa for middle air resistance 4000pa for high air resistance

Breekkracht- Warp =>6000 N/5cm X 20cm Breaking Strength- Inslag = >3000 N / 5 cm x 20 cm
Verlenging doorbreken – warp =<5% Breukverlenging -inslag =<5%

Max Width: 2800mm Operating Temperature < 150 graden C.
Recommended Maximum Continues <180 graden C.
Aanbevolen maximale piek = 180 graden C.

Packaging & Shipping

We provide all kinds of standard export packing for cargo protection. The bag filter will be fixed on the container. The filter bag and cages will be fixed in corrugated box and steel framed structure.

Onze diensten

1. Vragen beantwoorden snel binnen 24 uren.

2. Dienst na verkoop, snel antwoord, de installatiegids voor ingenieurs. De feedbackproblemen worden binnen beantwoord 24 uren. We kunnen ervoor zorgen dat professionele ingenieurs op de locatie van de apparatuur binnenkomen 48 werkuren voor opgelost probleem.

3. Het ontwerp van de stofafscheider volgens de specifieke omstandigheden van de stofverwijderingstechnologie. Het windnetwerkprojectontwerp voor alle systemen. Om het optimale structuurontwerp te zijn.

4. Het hele netwerk van de laagste prijs van apparatuur in Alibaba Welkom bij het tarief van de prijs. Als onze prijs hoger is, we zullen tweemaal het door ons opgegeven prijsverschil aan u terugbetalen. Gelieve te vragen voordat u het contract met ons ondertekent. Vanwege ons goede trouw-principe.

5. De zakfilterapparatuur is voorbij 20 jaar beroepsleven.

6. In verband met reserveonderdelen voor apparatuur, verzeker de vervangende onderdelen binnen 20 jaren.

7. Als accessoires de productie stoppen of updaten, om ervoor te zorgen dat de vervangende onderdelen normaal kunnen worden gebruikt, en blijf op de hoogte een jaar voordat de reserveonderdelen de productie stoppen.

8. Zorg voor een gemakkelijke bediening en absoluut geen zorgen over de toekomst

bedrijfsinformatie

CNP Co., Ltd. was opgericht in 2008, specializes in the field of air pollution control and bag filter, Inclusief technisch ontwerp, planning, overleg plegen, apparatuur onderzoek en ontwikkeling, manufacturing, sales, installation and commissioning, as well as production and services.

With national environmental design qualification and qualification certificate of foreign contracted projects, as well as certification of the IS09001, IS014001 and IS018001. Now we have become a much respected users-concerned PM2.5 dust control and industrial de-dusting solutions provider. We do contracting business of municipal solid waste incineration flue gas treatment system, electromechanical integration of environmental protection, total contracting capabilities of new technologies.

Since Five years ago, CNP has always regarded as our responsibility as to “Purify the atmosphere and benefit mankind”, adhered to scientific and technological innovation and introduction, digestion and development. So far, we have developed more than 30 sets of series over 400 kinds of specifications of bag filter, successfully undertake and complete total contracting of a variety of types of large, medium-sized dust-removal, desulfurization project.

Achieve an annual output of dust filter area of one million square meters. Products are sold domestically and also exported to nearly 20 countries and regions, including Japan,Korea, Singapore , Australia, USA,Brazil, Russia, Portugal,India, Vietnam , Bangladesh. Products are widely used in metallurgy,boiler,afvalverbranding , nonferrous metals, building materials, eten,light industry, chemical industry, machinery casting,electronics industries and so on.

Based on the high starting point, CNO Co., Ltd., with a positive and upward pioneering spirit, will further create brilliancy as to technological innovation, intellectual property rights and independent brand strategy.

Question:

Summary of Information Requested

It is important to us that we find out what is important to you, and offer the most effective solution for your specific dust collector needs.

To accomplish that, we will need to know as much of the following information from you as possible.

How much CFM will be needed for the Baghouse Dust Collector?

What type of material will you be collecting? and how much dust do you usually dispose of in a day?

What is the bulk density of the material?

Approximately what air velocity (FPM) are you looking for?

Do you have an Air-to-Cloth Ratio in mind?

What is the Air Temperature projected at the inlet duct?

Is the material explosive? If so, do you need a spark detection system, explosion vent, or sprinkler system?

How many pick-up points will there be?

What is the static pressure you are projecting for the system?

Are you wanting us to supply the Inlet Duct, Pick-Up Hoods, Installation, or Fan?

Do you want a Rotary Valve or Double Dump Valve, and is a screw conveyor required?

What are the height and size requirements, if applicable?

Do you have a specific filter bag material and construction that you are looking for?