Kanvas gelongsor udara / kain untuk kanvas slaid udara serbuk

White Textile Conveyor Belt Cement Airslide fabric

Air slide fabric for 100% filament polyester

INTRODUCTION

We provide Airslide belt for conveying bulk material by air gravity. The main use of Airslide belt is discharging, declining transportation or homogenizing the powder or small granular material in quiescent condition. Our airslide belt is named as Airslide fabric, Airslide membrane, Air slide cloth, Air slide canvas, Air permeable fabric, and Fluidization cloth, fluidising fabric, etc by our customer. We adopt 100% polyester for airslide fabric material.

Our fabrics can be used at temperatures between -60°C and +150°C. The airslide fabrics are made from polyester yarns.
We are also, however, able to weave fabrics to our customers’ specific demands for air permeability and mechanical strength.

Advantages

• No moisture absorption
• No caking
• Resistant to rotting and decomposition
• Complete unloading without residues
• Consistent fluidization over the complete surface
• Good resistance to abrasion
• Low wear and therefore longer life
• Low shrinkage even when used under hot and humid conditions

Prinsip kerja

In cement plant:
An Airslide belt is in the middle of a chute. Powder material will come into the chute above Airslide belt. Material will flow to the chute lower side as pneumatic blower down Airslide belt. That’s why we say Airslide belt can move powder material because of the wind power. Dan kemudian, the rest wind will go out from the top of the chute. Through the moving, no parts moved except powder material. So that it can spare more energy and maintain cost, dan lain-lain.

In fluidization silo:
Our Airslide canvas is installed on the surface of the silo bottom. It is supplied for installation as aeration units on the sloped conical bottoms of bins and silos to aid in the withdrawal of dry relatively free-flowing material.

Each Airslide aeration unit package consists of 200mm open-type. Airslide conveyor units in lengths of 1.5 or 3m depend on the slope length of the conical storage area. Some spoke patterns are normally used with materials which have good fluidization characteristics. Others spoke patterns provide maximum aeration for difficult materials which can be fluidized.

In cement vessel’s hold:
The sloped bottom of the cargo hold is covered with fluidizing panels. Our airslide fabric is on the surface of fluidizing panels. Rotary piston blowers supply the panels with oil-free compressed air and make the cement flow to the lowest point, where the discharge gate is installed.

Air slide fabric for particulate material transportation. Another name: Air slide cloth, pneumatic fluidizing canvas

Majlis bekerja

In industry

Penjana kuasa
Debu yang ditapis
Abu serpihan, membuang abu serombong
Habuk arang
Bangunan dan Pembinaan
Simen, habuk relau, gipsum, Batu kapur, kuarza tanah halus,
Kalsium hidroksida, plumbum monoksida, jalan cepat, hablur asid,
Tanah liat tulen, fosfat, kepekatan magnesit, tanah halus
fluorida, pengeluaran aluminium
Industri kimia
Makanan Thomas (Fertilizer)
Rubber compounds, sinter dust, catalysts
Sodium sulfate
Soap powder

In machinery:

Silos / Tanks
Discharging systems
Warehouse units
Mixing equipment
Homogenizing systems
Chute Bottoms
Conveyor systems
Ventilator systems
Aeration systems
Vehicles
Silo truck discharging cones
Railway wagon discharging cones
Vessel aeration & discharging bottoms
Container aeration & discharging bottoms
Powder Coating Machinery
Bottoms for sinter basin

Data spesifikasi:

Raw Material =100% spun fiber polyester

Weight in average = 4000 g/m²
Thickness = 5mm
Mean Air Permeability = 400 m³/m²h @350H₂O

Pressure: 2000pa for middle air resistance

4000pa for high air resistance

Kekuatan Pecah- Meledingkan=>6000 N/5cm X 20cm
Kekuatan Pecah- Pakan = >3000 N/ 5cm X 20cm
Pemanjangan Pecah – meledingkan=<5%
Pemanjangan Patah -pakan=<5%

Max Width: 2800mm

Operating Temperature < 150 deg.C
Recommended Maximum Continues <180 deg.C
Lonjakan Maksimum yang Disyorkan = 180 deg.C