Century New Power (Tianjin) International Trade Co., Ltd

LoginRegister
A+ R A-

HMC pulse stand-alone dust collector

HMC pulse stand-alone dust remover is a small-size bag dust remover that is developed based on similar products. It adopts pulse blow dust cleaning mode with high efficiency, high purification effect,

 high processing volume and long filter bag life-span,

 less maintenance, reliable working stability. It is widely used in metallurgy, building material, mechanical, chemical, mine industries for non-fiber industrial dust removing and material recycling.

 

hmc1
hmc1
hmc2
hmc3
 

This series is composed of 6 specifications, with each spec. divided into two models: standard dust pot model A and open flange model B (without dust pot). The main structure consists of filter room, filter bags, air cleaning room, dust pot, turning valve, pulse blow dust cleaning device, electric control box. The box is well welded with the repair gate sealed with foamed rubber belts

The dust air goes through the dust pot (or through the open flange) into the filter room, and the bigger dust powder descends to the bottom of the pot, while the smaller dust goes to the filter room with the air flow. The dust attaches to the surface of the filter bag and the purified air goes to the cleaning room on the top and gathers at the wind exit via several cleaning sectors. Then the purified air is released by the fan of the dust remover. The process repeats and the dust attached to filter bags become more and more, so the air flow friction become larger-----when a preset pressure value is reached, the time relay or the pressure sensor automatically starts dust cleaning process. The system closes the elevation valve of one cleaning sector to cut down the air flow and then opens the pulse valve to release compressed air to blow off the attached dust on the filter bags (stops the wind flow and dump the attached dust) by making each filter bag suddenly swell up and shakes off the dust attached and the filter bag outer and inner pressures become the same. The dust descends into the dust pot and is discharged by the turning valve. The pulse blow system only cleans the filter bags row by row, the other filter bags are working while one row is under cleaning.

1.Fasten the screw and make the surface flat. On-spot welding, make model A air-proof, model B directly installed on the dust spot.

2.The air bag pulse valve and its connection pipes should be air-proof.

3.Open the lid. Take off blow pipe. Handle the filter bag upright and place the bag into the filter room through the swage board bores. Then figure the open of the bag into circle shape, and fix it on the swage board bores closely with the clips. Check the air-proof of the bag system. Then insert the bag frame into the filter bag and install the blow pipe. Coordinate the axle of the pipe and the filter bag. Fasten the screws on the blow pipe and put on the lid.

Maintenance requirement

1.Set up on-duty maintenance system. The person on duty should record the working condition and inspect the electric dust cleaning devices (including PLC, electric-magnetic valve, pulse valve, elevation valve, etc. ) to see if they are working well. Adjust dust cleaning time to keep a high efficiency.

2.Periodically check the working condition of compressed air system and the air source pressure. The water filter should be discharged frequently. The oil atomizer should be timely oiled.

3.Watch the dust smog discharged. If abnormal situation occur, check the filter bags and filter room timely. Clog the leaking bores and charge filter bags if necessary.

4.Before shut down the dust remover, manually clean up the filter bag for maintenance.

Order information

1.When placing an order, please declare the spec., model, better with dust spot environment data, so that we can serve the buyer better.

2.If the equipment needs to be customized, please note in the contract and contact our sales department.

3.Equipment supply scale:

(1). Main Equipment: From the input/output flange to the dust pot dumping flange on the bottom. The air duct part is to the air entrance of sector rooms.

(2). Accessory: timing dust removing controller.

(3). Attached files: product instruction, installation drawings, product quality certificate.

(4). Our company sticks to the principle of innovation, so the product is under frequent revising. If the machine parameters are different from the written ones, please rest assured.

3. Main parameters table

Add comment


Security code Refresh

Product ranges

Prev Next

Pulse controllor

Pulse controllor

Working principle: pulse control instrument is a pulse signal, control pneumatic valve or electromagnetic valve, pulse valve injection shallow ash. The pulse signal generator is the main controlling pulse bag... Read more

Pulse controllor

Industrial Fans

We stocks and supplies fans and impellers for a variety of industries and customers.  Our full line of industrial fans may be the solution to your emission and air flow requirements. ... Read more

Industrial Fans

Needle corrugated belt

Needle corrugated belt

1. Our products are applied to many kinds of corrugated cardboard producing lines. It is an indispensable part to transport and dry the cardboards. Read more

Corrugated conveyor

PLC controller

PLC controller

PLC controller is based on fieldbus technology, completely open, and the use of advanced software and hardware technology, flexible, safe and reliable, installation is convenient, simple maintenance and greatly save... Read more

Pulse controllor

Right angle pulse valve

Right angle pulse valve

Right Angle type electromagnetic pulse valve: body import and export right angles, direct control of the diaphragm valve by electrical signals Read more

Electromagnetism pulse valve

Straight-through pulse valve

Straight-through pulse valve

Straight-through type electromagnetic pulse valve: body import and export into 180 degrees, by electrical signals directly control of the diaphragm valve Read more

Electromagnetism pulse valve

Submerged pulse valve

Submerged pulse valve

Submerged type electromagnetic pulse valve: The valve body submerged in the intake air bags, direct control of the diaphragm valve by electrical signals. Read more

Electromagnetism pulse valve

C6-46 dust centrifugal fan

C6-46 dust centrifugal fan

C6-46 discharging dust type centrifugal fan apply to row containing elastic fiber, send essence and dust etc air mixture, medium temperature not over 80 ℃, but also as a general... Read more

Dusting fan

C4-73 dust centrifugal fan

C4-73 dust centrifugal fan

Characteristic C4-73 type centrifugal fan mainly by the impeller, cabinet, wind path, frame transmission part and motor composition. Impeller part by 12 sloping wing of the leaves, QianPan type curve shape... Read more

Dusting fan

C6-48 dust centrifugal fan

C6-48 dust centrifugal fan

ApplicationC6-48 discharging dust type centrifugal fan apply to row containing elastic fiber, send wood and dust etc air mixture. Read more

Dusting fan

BB24, BB50 cement kiln high temperature …

BB24, BB50 cement kiln high temperature fan

BB24, BB50 series preheater high temperature fan, used for cement of cement XuanYao waste gas processing in for nissan 300-8000 tons of cement production line supporting. The two series of... Read more

High temperature fan

Ball mill

Ball mill

This series of ball mill is suitable for ore dressing, chemical, coal, cement and refractory sectors to operate fine grinding. Read more

cement equipment

Single cylinder drier

Single cylinder drier

Horizontal dryer are the subject of a has a downward turn of the cylinder, Read more

drying machinery

Fly ash, coal dryer

Fly ash, coal dryer

The wind of bulk materials dryer is combined with the traditional advantage of coal ash dryer, developed a new type of powder drying equipment. Read more

drying machinery

GY4-73 Boiler fan

GY4-73 Boiler fan

G4-73 and Y4-73 type boiler is connected, induced draft fan apply to thermal power plant 2 ~ 670 T/h boiler steam of communication, induced draft fan system. In no other... Read more

Boiler centrifugal fan

Y5-48 boiler draft fan

Y5-48 boiler draft fan

Y5-48 type boiler centrifugal induced draft fan is to adapt to all kinds of burning coal and is equipped with suppressing smoke except the device (1 ~ 20 T/h) industrial... Read more

Boiler centrifugal fan

4-68Type centrifugal fan

4-68Type centrifugal fan

One The purpose of fan:4-68 type centrifugal fan, as a general ventilated take a breath using. The use conditions as follows:1, Application places: as a general factory and big building... Read more

Industrial Fans

GY4-68 boiler fan

GY4-68 boiler fan

One The purpose of fan:4-68 type centrifugal fan, as a general ventilated take a breath using. The use conditions as follows:1, Application places: as a general factory and big building... Read more

Boiler centrifugal fan

Boiler centrifugal fan

Boiler centrifugal fan

The fan is in order to use changes in the industrial boiler operation, induced draft fan can work at high efficiency zone, to achieve the purpose of energy-saving design. Read more

Boiler centrifugal fan

Y8-39、Y9-38 boiler fan

Y8-39、Y9-38 boiler fan

The fan is in order to use changes in the industrial boiler operation, induced draft fan can work at high efficiency zone, to achieve the purpose of energy-saving design. Read more

Boiler centrifugal fan

Triple cylinder dryer

Triple cylinder dryer

The three-cylinder dryer in wet materials drying equipment series products, rotary the three-cylinder dryer is in a single cylinder rotary dryer Read more

drying machinery

Gas blower

Gas blower

Gas is mainly used for the coal gas transportation blower, pressure and so on purpose. In coke oven gas, of converter gas, calcium carbide flue gas industry wide use. Gas... Read more

High temperature fan

Single-axes humidifying mixer

Single-axes humidifying mixer

The single-axes humidifying mixer  Read more

cement equipment

Filter bags

Filter bags

We offers a complete line of Standard Dust Collector Filter BagsShaker & Reverse Air Baghouse Bags Read more

Filter bags

Pneumatic type desulfurization precipita…

Pneumatic type desulfurization precipitator:

Summary of pneumatic type desulfurization precipitator:  Pneumatic type dust collector is improved based on the spray wet method of traditional desulfurization  , it include all of the features of spraying, adsorption,... Read more

Air drive desulfurization filter

Atomization drying Multibarrel desulfura…

Atomization drying Multibarrel desulfuration dust collector

Atomization drying desulfurization deduster is a desulfurating and dedusting equipment which is designed on the basis of ceramic multitube deduster. Read more

Multibarrel desulfuration dust collector

DMC pulse bags filter dust collector

DMC pulse bags filter dust collector

DMC pulse bags filter makes the compressed air as the driving force for cleaning dust, the pulse injection organization releases the compressed air instantly and induces the secondary high-speed air... Read more

Pulse dust collectors

Mine crusher dust collector

Mine crusher dust collector

1. Summarize Mine crusher dust collector, it is a news bag filters. To adopt High-frequency impulse airflow of reverse jet fan, it can jetting the filter bag one by one through... Read more

Rotary reverse jet dust collector

Y5-47 boiler fan

Y5-47 boiler fan

Y5-47 type boiler centrifugal induced draft fan purposes Y5-47 type boiler centrifugal induced draft fan, is to adapt to all kinds of burning coal and XiaoYanChuChen device (1 ~ 20 tons/hour)... Read more

Boiler centrifugal fan

Birotor classifier

Birotor classifier

Efficient double rotor classifier will smooth with good use of eddy current in the whirlwind classifier. Read more

powder classifier

Register

*
*
*
*
*

* Field is required