Century New Power (Tianjin) International Trade Co., Ltd

LoginRegister
A+ R A-

Atomization drying Multibarrel desulfuration dust collector

Atomization drying desulfurization deduster is a desulfurating and dedusting equipment which is designed on the basis of ceramic multitube deduster.

 It changes the original structure of multitube swirling deduster and uses the left heat of the flue gas itself to heat the ordered arranged heat conducting water pipe to form steam. The operation is convenient and the dedusting effect is good. Because it can be regenerated, the comprehensive cost is low.
Desulfurating principle: The main principle of desulfurating by active carbon is the function of catalysis and absorption. When the carbon gas containing H2S goes through the active carbon layer, it releases heat under normal temperature and will be catalyzed and oxidized into S and H. The products are absorbed by active carbon. The purpose of desulfuration can be achieved. Regeneration principles: Send the over hot steam which is heated above the temperature of 400centigrade to go through the active carbon layer. S will be melted into liquid or gas and precipitated from the holes of active carbon. It will be taken out of the active carbon bed with the over hot steam to the water cooling tank. S will be cooled in to solid to lie in the bottom of the tank. The gas, which is not cooled will be discharged by through the chimney. The active carbon will be regenerated and be recycled. S can be reclaimed and the purpose of regeneration can be achieved.

Main Technique Features
1. Efficiency of the Deduster: >=95%
2. Desulfurating Efficiency: 60-70%
3. Dust Exhausting Thickness: <200mg/m3
4. Ringelmann Blackness: <1 grade
5. Resistance: <1200Pa

Installation and Using Instructions
1. The desulfurating deduster is divided into deduster itself, desulfurating bed and ash hopper when leaving the factory. When installing, the main body should be installed on the upper flange joint of the ash hopper bracket. The desulfurating bend should be installed on the main body and connected to the exit flange. The water tank should be filled according to requirements.
2. The desulfuration blocks should be ranged tightly and with order.
3. After the installation of water tank, water filling should be tested. The water should be filled until there is water overflowing from the overflow port.
4. Every gap between flanges should be sealed. The air impermeability of the system should be checked.
5. When the equipment is running without stop, ash should be discharges periodically. It is better to check about once 4 hours.
6. The using units should reinforce the management and check periodically to avoid leakage. When there are problems, they should be solved in time to assure a good running condition of the atomization dedusters.
7. The changing time of desulfuration blocks should be two times per year for warming stoves and four times for industrial furnaces to assure the desulfurating effect.

Add comment


Security code Refresh

Product ranges

Prev Next

Pulse controllor

Pulse controllor

Working principle: pulse control instrument is a pulse signal, control pneumatic valve or electromagnetic valve, pulse valve injection shallow ash. The pulse signal generator is the main controlling pulse bag... Read more

Pulse controllor

Industrial Fans

We stocks and supplies fans and impellers for a variety of industries and customers.  Our full line of industrial fans may be the solution to your emission and air flow requirements. ... Read more

Industrial Fans

Needle corrugated belt

Needle corrugated belt

1. Our products are applied to many kinds of corrugated cardboard producing lines. It is an indispensable part to transport and dry the cardboards. Read more

Corrugated conveyor

PLC controller

PLC controller

PLC controller is based on fieldbus technology, completely open, and the use of advanced software and hardware technology, flexible, safe and reliable, installation is convenient, simple maintenance and greatly save... Read more

Pulse controllor

Right angle pulse valve

Right angle pulse valve

Right Angle type electromagnetic pulse valve: body import and export right angles, direct control of the diaphragm valve by electrical signals Read more

Electromagnetism pulse valve

Straight-through pulse valve

Straight-through pulse valve

Straight-through type electromagnetic pulse valve: body import and export into 180 degrees, by electrical signals directly control of the diaphragm valve Read more

Electromagnetism pulse valve

Submerged pulse valve

Submerged pulse valve

Submerged type electromagnetic pulse valve: The valve body submerged in the intake air bags, direct control of the diaphragm valve by electrical signals. Read more

Electromagnetism pulse valve

C6-46 dust centrifugal fan

C6-46 dust centrifugal fan

C6-46 discharging dust type centrifugal fan apply to row containing elastic fiber, send essence and dust etc air mixture, medium temperature not over 80 ℃, but also as a general... Read more

Dusting fan

C4-73 dust centrifugal fan

C4-73 dust centrifugal fan

Characteristic C4-73 type centrifugal fan mainly by the impeller, cabinet, wind path, frame transmission part and motor composition. Impeller part by 12 sloping wing of the leaves, QianPan type curve shape... Read more

Dusting fan

C6-48 dust centrifugal fan

C6-48 dust centrifugal fan

ApplicationC6-48 discharging dust type centrifugal fan apply to row containing elastic fiber, send wood and dust etc air mixture. Read more

Dusting fan

BB24, BB50 cement kiln high temperature …

BB24, BB50 cement kiln high temperature fan

BB24, BB50 series preheater high temperature fan, used for cement of cement XuanYao waste gas processing in for nissan 300-8000 tons of cement production line supporting. The two series of... Read more

High temperature fan

Single cylinder drier

Single cylinder drier

Horizontal dryer are the subject of a has a downward turn of the cylinder, Read more

drying machinery

GY4-73 Boiler fan

GY4-73 Boiler fan

G4-73 and Y4-73 type boiler is connected, induced draft fan apply to thermal power plant 2 ~ 670 T/h boiler steam of communication, induced draft fan system. In no other... Read more

Boiler centrifugal fan

Fly ash, coal dryer

Fly ash, coal dryer

The wind of bulk materials dryer is combined with the traditional advantage of coal ash dryer, developed a new type of powder drying equipment. Read more

drying machinery

Ball mill

Ball mill

This series of ball mill is suitable for ore dressing, chemical, coal, cement and refractory sectors to operate fine grinding. Read more

cement equipment

GY4-68 boiler fan

GY4-68 boiler fan

One The purpose of fan:4-68 type centrifugal fan, as a general ventilated take a breath using. The use conditions as follows:1, Application places: as a general factory and big building... Read more

Boiler centrifugal fan

Boiler centrifugal fan

Boiler centrifugal fan

The fan is in order to use changes in the industrial boiler operation, induced draft fan can work at high efficiency zone, to achieve the purpose of energy-saving design. Read more

Boiler centrifugal fan

Triple cylinder dryer

Triple cylinder dryer

The three-cylinder dryer in wet materials drying equipment series products, rotary the three-cylinder dryer is in a single cylinder rotary dryer Read more

drying machinery

Pneumatic type desulfurization precipita…

Pneumatic type desulfurization precipitator:

Summary of pneumatic type desulfurization precipitator:  Pneumatic type dust collector is improved based on the spray wet method of traditional desulfurization  , it include all of the features of spraying, adsorption,... Read more

Air drive desulfurization filter

4-68Type centrifugal fan

4-68Type centrifugal fan

One The purpose of fan:4-68 type centrifugal fan, as a general ventilated take a breath using. The use conditions as follows:1, Application places: as a general factory and big building... Read more

Industrial Fans

Gas blower

Gas blower

Gas is mainly used for the coal gas transportation blower, pressure and so on purpose. In coke oven gas, of converter gas, calcium carbide flue gas industry wide use. Gas... Read more

High temperature fan

Single-axes humidifying mixer

Single-axes humidifying mixer

The single-axes humidifying mixer  Read more

cement equipment

Filter bags

Filter bags

We offers a complete line of Standard Dust Collector Filter BagsShaker & Reverse Air Baghouse Bags Read more

Filter bags

DMC pulse bags filter dust collector

DMC pulse bags filter dust collector

DMC pulse bags filter makes the compressed air as the driving force for cleaning dust, the pulse injection organization releases the compressed air instantly and induces the secondary high-speed air... Read more

Pulse dust collectors

Y8-39、Y9-38 boiler fan

Y8-39、Y9-38 boiler fan

The fan is in order to use changes in the industrial boiler operation, induced draft fan can work at high efficiency zone, to achieve the purpose of energy-saving design. Read more

Boiler centrifugal fan

Y5-48 boiler draft fan

Y5-48 boiler draft fan

Y5-48 type boiler centrifugal induced draft fan is to adapt to all kinds of burning coal and is equipped with suppressing smoke except the device (1 ~ 20 T/h) industrial... Read more

Boiler centrifugal fan

Atomization drying Multibarrel desulfura…

Atomization drying Multibarrel desulfuration dust collector

Atomization drying desulfurization deduster is a desulfurating and dedusting equipment which is designed on the basis of ceramic multitube deduster. Read more

Multibarrel desulfuration dust collector

Birotor classifier

Birotor classifier

Efficient double rotor classifier will smooth with good use of eddy current in the whirlwind classifier. Read more

powder classifier

Cement mill

Cement mill

Cement mill is mainly used in grinding of cement finished products and materials,also to the Read more

cement equipment

Y5-47 boiler fan

Y5-47 boiler fan

Y5-47 type boiler centrifugal induced draft fan purposes Y5-47 type boiler centrifugal induced draft fan, is to adapt to all kinds of burning coal and XiaoYanChuChen device (1 ~ 20 tons/hour)... Read more

Boiler centrifugal fan

Register

*
*
*
*
*

* Field is required